Oil Only - White Fine Fiber Pads

The following products help you comply with:
29 CFR 1910.22(a)(2) – Floors in your workplace should be, “maintained in a clean and, so far as possible, a dry condition.”
40 CFR 112.7(5)”make them readily usable in an emergency, and include appropriate supporting material as appendices.”( c )“At a minimum, you must use one of the following prevention systems or its equivalent:”(vii) Sorbent materials.

Prosorbents™ Fine fiber pads and rolls are constructed from melt blowing a polypropylene cover stock of 1 oz. per square yard, material. We create a dense smooth finish by blowing a fiber less than 5 microns at slower speeds to give a low-linting and a high tensile strength product.

After we have made the cover stock, we then blow a high capacity melt blown polypropylene fiber, and sonic weld the cover stock to the top and bottom of the melt blown high capacity fiber material, leaving a polished quilted appearance and an in-credibly absorbent and strong product.

Prosorbents™ technology is a unique process that is used in our Technical and Medical Grade products. This process of producing long fine fibers, is used in our absorbent products creating a highly absorbent and strong fine fiber material.

The longer fiber length gives our pads higher tensile strength, more durability, and greater loft allowing greater absorbency than other standard melt blown pads. White Fine Fiber pads are highly visible and the visual cues are much like all the other white sorbents we use to clean up spill. Easy to see when to change out the pads when they hit capacity, but with three layers, it will not fall apart when saturated.

• Fine Fiber sorbents, are produced by sonic welding two sheets of Fine Fiber cover stock to the inner sorbent core of polypropylene melt-blown sorbent.
• Specially sonic-bonded three layer material to give added strength for tough jobs and high traffic areas.
• ProSorbents™ Fiber Technology is specifically designed to handle demanding tasks and large volume cleanups.
• Flame-resistant material won’t burn like cellulose absorbents.
• Can be wrung out and incinerated after use to reduce waste.
• Absorbs petroleum and aqueous based liquids.
• Pads are ideal for catching drips and soaking up spills.
• Prosorbents™ flame-resistant material melts when exposed to high heat while on the job.

FF10129 - 15" X 18" Heavy Weight Oil Only Dimpled Pads.  21 gallon absorbency, 100/Bale, 30 units/skid.

FF10127 - 15" X 18" Medium Weight Oil Only Dimpled Pads.  16.4 gallon absorbency, 100/Bale, 42 units/skid.

FF14025 - 15" X 18" Light Weight Oil Only Dimpled Pads.  24 gallon absorbency, 200/Bale, 30 units/skid.